Comments on: eeSilk+ Suspension Seatpost https://canecreek.com/product/eesilk-plus/ Tue, 23 Jul 2024 14:18:09 +0000 hourly 1 https://wordpress.org/?v=6.6 By: Andy Bennett https://canecreek.com/product/eesilk-plus/#comment-182298 Thu, 20 Jun 2024 20:58:56 +0000 https://canecreek.com/?post_type=product&p=30698#comment-182298 In reply to RAUL.

Hello, yes, you can cut the eeSilk + seat post, as long as you leave the minimum insertion of 100mm to install into the seat tube.

]]> By: RAUL https://canecreek.com/product/eesilk-plus/#comment-182254 Thu, 20 Jun 2024 16:23:31 +0000 https://canecreek.com/?post_type=product&p=30698#comment-182254 Can I cut the aluminum stem if it is too long?
If not, how does the product suppose to fit different sizes of bikes and riders? Is it exclusively for some bike post lengths?

]]> By: Andy Bennett https://canecreek.com/product/eesilk-plus/#comment-181472 Mon, 17 Jun 2024 18:46:28 +0000 https://canecreek.com/?post_type=product&p=30698#comment-181472 In reply to J.B..

Hello, thanks for reaching out, however, our eeSilk + seat post can only been used in one direction due to the design of the Parallel linkage technology.

]]> By: J.B. https://canecreek.com/product/eesilk-plus/#comment-181444 Mon, 17 Jun 2024 17:10:55 +0000 https://canecreek.com/?post_type=product&p=30698#comment-181444 Can the seatpost be used rotated 180degrees to remove the rear bias offset? or is there an adapter that could remove the offset?

]]> By: Andy Bennett https://canecreek.com/product/eesilk-plus/#comment-171130 Thu, 18 Apr 2024 19:21:43 +0000 https://canecreek.com/?post_type=product&p=30698#comment-171130 In reply to Mike Allen.

Hello, minimum extension on our eeSilk+ seat post is 80mm or 8CM.

https://canecreek.com/product/eesilk-plus/

]]> By: Mike Allen https://canecreek.com/product/eesilk-plus/#comment-171109 Thu, 18 Apr 2024 16:47:24 +0000 https://canecreek.com/?post_type=product&p=30698#comment-171109 How “tall” is the elastomer section? With my current seat positioning I have about 8cm from the top of the seat tube to the bottom the the seat rail; is that enough space?

]]> By: Andy Bennett https://canecreek.com/product/eesilk-plus/#comment-161548 Mon, 11 Mar 2024 14:48:34 +0000 https://canecreek.com/?post_type=product&p=30698#comment-161548 In reply to Chris Martin.

Hello, thanks for reaching out, however, this seatpost cannot be added to a dropper.

]]> By: Chris Martin https://canecreek.com/product/eesilk-plus/#comment-161197 Sun, 10 Mar 2024 11:48:33 +0000 https://canecreek.com/?post_type=product&p=30698#comment-161197 Can I add this to a dropper seat post?

]]> By: Andy Bennett https://canecreek.com/product/eesilk-plus/#comment-155867 Fri, 09 Feb 2024 13:40:24 +0000 https://canecreek.com/?post_type=product&p=30698#comment-155867 In reply to Tim.

Hello, minimum insertion is 100mm for our eeSilk+ aluminum and carbon seat posts. Maximum extension for our eeSilk+ Alloy is 287mm and 262mm for our carbon.

]]> By: Tim https://canecreek.com/product/eesilk-plus/#comment-155859 Fri, 09 Feb 2024 13:08:57 +0000 https://canecreek.com/?post_type=product&p=30698#comment-155859 Is the maximum extension for the carbon and aluminum version the same? The posts differ 25mm in length, but there is only one maximum extension shown.

]]>