Menu
In 2019 Cane Creek launched their WS130 down country low travel fork, 4 years later they are paying homage to the WS130 by introducing an extremely limited run of their low travel modular fork, the Works Series Helm. The Works Series Helm is a robust, modular fork that equips riders looking for a fork in the 100-130mm travel range with the confidence to ride through tech or push up climbs.
The Works Series Helm is available in 4 travel options: 100mm, 110mm, 120mm and 130mm options. Like Cane Creek’s Helm MKII, the Works Series can easily be travel adjusted in 10mm increments with just a few tools at home. Built with a stiffer chassis, the Works Series gives a smoother, more controlled ride.
All of Cane Creek’s suspension products are hand-built in Western North Carolina and rigorously tested in the Pisgah National Forest. This Limited Works Series Helm fork is available while supplies last for $1099.99.
Helm Works Series is now sold out.
All fork returns are subject to a 20% restocking fee.
The Works Series Helm beats out the competing fork with a stiffer chassis, giving riders more control through chundery sections of trails and rock gardens. This fork is the perfect do-all for riders who regularly ride XC and occasionally rip on more technical and challenging terrain.
Every single Helm fork is designed, built, inspected, tested and packed by a dedicated team of suspension professionals at our facility in Fletcher, North Carolina. Our suspension team’s attention to detail is illustrated in our three step Dyno testing, ensuring that our hand built products reach high standards of precision and performance.
This process includes:
| Weight | 1995g = 130mm w/axle – 100g savings from Helm MKII |
|---|---|
| Stanchion | 35mm |
| Max Tire Size | 64mm wide by 749mm tall |
| Axle/Hub Spacing | 15mm x 110 BOOST |
| Offset | 44mm Offset |
| Adjustments | High speed compression (10 positions) |
| Part #s | BAG0755 – 100MM |
No. The Works Series is optimized for 130mm and shorter. We do offer standard Helm forks up to 160mm.
Uncut, the Helm forks have a steer tube length (from crown race seat to steer tube's end) of 9.25".
You also have the option of reducing your headset upper stack height using our Hellbender 70 Slam headset.
On your ZS44 headset this will gain you an additional 6mm vs a traditional ZS44 headset: https://canecreek.com/product/hellbender-70-slam/
The Helm Works Series minimum rotor size is 180mm so you can use 180mm or larger using an adapter for larger rotors. If using a Hope brand caliper you must use a 200mm or larger since Hope calipers contact the fork using a rotor smaller than 180mm
Helm Works Series has listed tire width of 64mm\2.52in. regardless of wheel size. I wouldn't be very surprised if a wider tire could fit, but that is our listed spec.
Hi Joseph! Yes, the maximum tire width is 64mm which is 2.51 inches.
Ask a question
Your question will be answered by a store representative or other customers.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Reviews
There are no reviews yet